Empennage · Tailcone — Work Session (2h 47m)

2026-08-16

Empennage · Work package 10 Tailcone · 2h 47m · Plans: Page 10-5, Section 10, Step 2

Started with the tailcone stiffeners. Measuring, and drawing the rivet lines. Also, the thread tap arrived so I could finish the step I left out before.

Photo from: Empennage · Tailcone — Work Session (2h 47m) (1 of 2)

Photo from: Empennage · Tailcone — Work Session (2h 47m) (2 of 2)

← All entries in this build log